Protector GTA Type-1 Grey Tile Adhesive from RVM DRY MIX™ is a cement-based tile adhesive specially developed for fixing ceramic tiles on internal floors and walls. It provides dependable bonding performance for residential and commercial spaces, helping achieve neat and durable tile installations.
Designed for applications such as living rooms, bedrooms, and other interior floor and wall surfaces, GTA Type-1 offers easy mixing and smooth application. The adhesive is applied at a recommended bed thickness of 3–4 mm, ensuring efficient tile placement while maintaining uniform coverage and strong adhesion.
Each 30 Kg bag delivers an approximate coverage of 70–80 square feet under recommended application conditions. With an open time of 20 minutes and an adjustable time of 20 minutes, installers have sufficient working time for accurate tile alignment and finishing.
Manufactured to meet IS 15477:2019, EN12004, and ISO 13007:2017 standards, Protector GTA Type-1 combines quality, consistency, and ease of application, making it a practical solution for ceramic tile fixing in a wide range of interior projects.
Provides reliable adhesion for ceramic tiles on internal floors and walls, helping achieve secure and long-lasting tile installations.
Designed for thin-bed fixing, reducing adhesive consumption while delivering level, uniform tile surfaces.
Offers up to 20 minutes open time and 20 minutes adjustability time, allowing installers sufficient time for accurate tile placement and alignment.
Mixes into a creamy, lump-free paste that spreads easily with a notched trowel, improving workmanship and speed.
Helps minimise tile slipping during installation, especially on internal wall areas, allowing accurate alignment.
One 30 kg bag can cover around 70–80 SFT of tiling area, helping control project costs and material wastage.
Ideal for Ceramic tiles in living rooms, bedrooms, halls, and passages.
Suitable for internal floor and wall tiling on well-prepared cementitious substrates.
Recommended for apartments, villas, and independent homes where durable, neat tile finishes are required.
Suitable for shops, offices, and showrooms with moderate foot traffic on ceramic tiles.
Can be used on staircases and landings where a secure tile bond is required on cement-based substrates.
Supplied in 30 kg laminated BOPP bags for safe handling and transport.
Has a shelf life of up to 12 months from the date of manufacture when kept in unopened bags.
Store in a cool, dry, covered area, away from direct moisture and heat. Keep bags on pallets, not directly on the floor.
Contains cement and mineral fillers that may cause irritation on prolonged contact. Use gloves and eye protection.
Wear a dust mask while opening bags, mixing, or handling the dry powder to avoid respiratory discomfort.
If the material enters the eyes, rinse immediately with plenty of clean water and seek medical attention if irritation continues.
| Parameters | Specifications |
|---|---|
| Form | Factory-blended grey, cementitious powder |
| Tile Types | Ceramic tiles for internal floor and wall applications |
| Recommended Bed Thickness | 3–4 mm (thin-bed application) |
| Open Time | Up to 20 minutes (site conditions dependent) |
| Adjustability Time | Within 20 minutes after tile placement |
| Pot Life | Approx. 60–90 minutes after mixing |
| Water Requirement | Typically around 4.8–5.2 L per 30 kg bag, or as needed for a workable, creamy mix |
| Coverage | Approx. 70–80 SFT of tiling per 30 kg bag at 3–4 mm thickness |
| Bond Strength | High adhesion suitable for internal ceramic tile applications |
| Curing Requirement | Follow standard tile installation practices and site recommendations. |
| Foot Traffic / Grouting | Typically after 24 hours (depending on temperature and substrate) |
| Packaging | 30 kg laminated BOPP bags |
| Shelf Life | Up to 12 months in unopened original packaging, stored in dry conditions |
